Services

Civil 3D Grade-Control Modeling in Michigan

Most Civil 3D models are built for plan production, not for machines. The difference shows up the moment your grade control system tries to read the surface. Great Lakes SiteLogic builds Civil 3D models specifically for grade control: surfaces your machines can trust, corridors that tie out, and data structured the way field crews need it.

Modeled for the machine, not just the plan set

A pretty corridor profile doesn't help a dozer operator. We build finished-grade surfaces, subgrade surfaces, and the supporting linework with machine control in mind from the start. That means proper targeting, clean daylighting, consistent assembly logic, and surfaces that don't have the spikes and gaps that come from models built for plotting.

What you get

  • Finished-grade and subgrade surface models built for grade control export
  • Corridor modeling with correct assemblies, targets, and frequency settings
  • Model review and cleanup: take an existing design model and make it field-usable
  • Revisions turned around fast when the engineer issues a change

We speak both languages

Design engineers and dirt crews think about models differently. We sit between the two. Contractors across Saginaw, Bay City, and Midland use our models because they arrive ready to run, not as raw design files that need an hour of fixing before the first cut.

Common problems we fix

  • Surfaces with spikes, holes, or bad triangles from plotting-focused design models
  • Corridors that don't daylight correctly or have gaps at intersections and transitions
  • Missing subgrade surfaces when only finished grade was designed
  • Models that don't match the latest plan revision

Our modeling process

  1. Plan and file review. We look at plan sheets, CAD, and any engineer's model to see what's usable.
  2. Build or rebuild the surfaces. Finished grade, subgrade, and section-specific surfaces built for the machine, not the plot.
  3. Quality check. We check surfaces against plan spot elevations, profiles, and cross sections.
  4. Export for the field. Surfaces and linework exported in the formats your grade control and layout equipment need.
  5. Revision tracking. Each update is dated and labeled so the crew knows which model is current.

Inputs we can work from

  • Civil 3D drawings and engineer's design models
  • CAD/DXF linework and PDF plan sets
  • LandXML surfaces and alignments
  • Existing topo surveys and control point files

Frequently asked questions

Do you need the engineer's Civil 3D files?

They help, but they aren't required. We can build grade-control surfaces from PDF plans and CAD linework when design models aren't available.

What's the difference between a design model and a grade-control model?

A design model is built to produce plan sheets. A grade-control model is built so a machine can cut and fill to it accurately, with clean surfaces, correct subgrade depths, and no gaps.

Can you model just part of a job?

Yes. Building pads, parking lots, ponds, roads, or utility runs can be modeled on their own when that's all you need.

Get a model you can put in the cab

If your operators are fighting surfaces or your models need cleanup before every job, that's what we do all day.

Email info@greatlakessitelogic.com for a quote on your next model.

Email Us